PRODUCT SPECS

Operating weight: 12,786 lbs (5,800 kg)
Engine power: 74 HP (55,4 kW)
Bucket capacity: 1.31-2.03 yd3 (1.0-1.55 m3)
Tipping load, straight: 9,634 lbs (4,370 kg)
Tipping load, articulated: 8,510 lbs (3,860 kg)

OPERATING DATA, STANDARD EQUIPMENT
Operating weight (SAE J 1197): 12,786 lbs (5,800 kg)
Tipping load, straight at full reach (ISO 14397-1): 9,634 lbs (4,370 kg)
Tipping load, articulated at full reach (ISO 14397-1): 8,510 lbs (3,860 kg)
Total length, bucket on ground: 17' 3" (5,270 mm)
Total width: 6' 5" (1,950 mm)
Turning radius at outside bucket edge: 14' 7" (4,445 mm)
Wheelbase: 7' 3" (2,220 mm)
Total height (top of cab): 9' 1" (2,765 mm)

ENGINE
Manufacturer, model: Deutz, TCD 2.9 L4
Type Turbo diesel engine with intercooler, exhaust-gas optimised, EPA Tier 4 Final / EC stage III B
Combustion: 4-stroke cycle, Common Rail injection
Number of cylinders: 4 in line
Displacement: 177 in3 (2,900 cm3)
Net power rating at 2,200 rpm (SAE J 1349): 74 hp (55.4 kW)
Max. torque: 221 lb ft (300 Nm) @ 1,600 rpm
Cooling system: Water

ELECTRICAL SYSTEM
Nominal voltage: 12 V
Battery: 12 V / 100 Ah
Generator: 14 V / 95 A
Starter: 12 V / 3.5 hp (2.6 kW)
Cold-starting aid: Glow plugs

Lighting system in compliance with US/ISO standards, H7 headlamps.

POWER TRANSMISSION
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics, automatic optimisation and adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed ranges. Infinitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear axle via cardan shaft to front axle. Inching pedal for sensitive driving and stopping at high rpm.

4 speeds:
“Low”: 0-3.7 / 0-11.2 mph (0-6 / 0-18 kph)
“High”: 0-7.5 / 0-22 mph (0-12 / 0-36 kph)
Drawbar pull: 9,873 lbs (4,388 daN)

AXLES
Rigid front axle with 45% limited slip differential. Oscillating rear axle with 45% limited slip differential. Center-mounted disc brake. Rear axle weights, 661 lbs (300 kg) are standard.

TIRES
Standard: 405/70 R 20 SPT 9 Dunlop

BRAKES
Service brake: Hydraulically actuated center-mounted disc brake, acting on all 4 wheels via 4-wheel drive
Auxiliary brake: Hydrostatic drive provides dynamic braking
Parking brake: Mechanically actuated center-mounted disc brake on front axle

STEERING
Articulated, 2 steering cylinders with final positioning damping on both sides, fully hydraulic through Load-Sensing
priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle: 80 deg.

FLUID CAPACITIES
Fuel tank: 29 gal (110 l)
Hydraulic system (incl. tank): 23 gal (88 l)

HYDRAULIC SYSTEM
Max. pump capacity: 19 gpm (76 l/min)
Max. working pressure: 3,626 psi (250 bar)

Control unit: Proportional hydraulic valve with 3 control circuits, supplying work functions “Lift / Lower”, “Dump / Tilt-back with high-speed control” and “3rd control circuit (1st additional control circuit)”. Simultaneous, independent control of all movements.

Hydraulic cylinders: 1 lifting cylinder, 1 tilt cylinder, all dual-action
The thermostatically controlled oil circuit ensures that the oil temperature is promptly reached and avoids overheating. Return filter installed in hydraulic tank allows for eco-friendly replacement of filter elements.

Fingertip control for 3rd control circuit, electro-proportional, oil flow limitation via machine function display, continuous operation. Installation on loader frame incl. couplings.

Hydraulically switchable float position by overdriving the pressure point “Lower” on the joystick, electrically switchable continuous operation function.

Single, four-way control lever (joystick) with integrated direction-of-travel switch and switch for additional control circuit.

LOADER FRAME
Loader installation featuring true parallel linkage and hydraulic quick coupler

General-purpose bucket (SAE J 742): 1.31 yd3 (1.00 m3)
Lift capacity at ground level (SAE J 732): 13,713 lbf (61,000 N)
Breakout force at bucket edge (SAE J 732): 12,365 lbf (55,000 N)

FORK LIFT ATTACHMENT
Operating load (SAE J 1197), over the total lift and steering range: 3,497 lbs (1,586 kg)*
Operating load in transport position, above ground level, total steering range: 4,410 lbs (2,000 kg)*
Width of fork carrier: 4' 1" (1,240 mm)
Length fork tines 4" x 1.8" (100 mm x 45 mm): 3' 7" (1,100 mm)
Stability factor on level and solid ground: 2

Load center from fork attachment point: 22" (560 mm)

CAB
Rubber-mounted full-vision steel cab, ROPS (EN ISO 3471) and FOPS** (EN ISO 3449) certified.

Cab featuring two doors, intermittent wipers and washer (front and rear), tinted panoramic safety glass, sliding window on left-hand side.

Driver’s seat MSG 85 (comfort version), with hydraulic cushioning, extra-high backrest, lumbar support, longitudinal and tilt adjustments, lap belt, in compliance with ISO 7096 and ISO 6683.

Cab heating with 3-speed heater fan (choice fresh air/recirculating air) and windshield defroster, front and rear.

Standard: Air conditioning. Back-up alarm for reverse travel. Battery disconnector. Guard for fan wheel and V-belt. Immobilizer, electronic, keypad operation. 2 working floodlights, front. 2 working floodlight, rear. Rear axle weights, approx. 660 lbs (300 kg). Steering wheel with height and tilt adjustment.

Cab exterior noise level: 101 dB (A)
Cab interior noise level: 76 dB (A)
Noise level values measured in compliance with Directive 2000/14/EC and EN474.
*With rear axle weights
**FOPS-approved only with skylight guard (optional)

PRODUCT REVIEWS

No reviews of this machine

There are currently no reviews of this machine. To leave one email info@projectequipment.ca